Publications / Conference contributions
Bultmann, J. M.; Lintz, F.-C.
Expertsystems in pharmaceutical development. Part I: Principles of formulation development for different dosage forms using the knowledge based system "Galenisches Entwicklungs-System Heidelberg"
1st virtual congress about pharmacy, Granada (1997)
Bultmann, J. M.; Lintz, F.-C.
Expertsystems in pharmaceutical development. Part II: Concepts of a multistep development of dosage forms using tablets out of granules as example
1st virtual congress about pharmacy, Granada (1997)
Lintz, F.-C.; Bultmann, J. M.
Expertsystems in pharmaceutical development. Part III: Strategies for creating a new module for tablet coating in a laboratory-scale drumcoater
1st virtual congress about pharmacy, Granada (1997)
Bultmann, J. M.; Stricker, H.
Predicting granule properties: granule size
Proc. 3rd World Meeting APV/APGI, Berlin, 3/6 April (2000), p. 65-66
Bultmann, J. M.; Lintz, F.-C.; Stricker, H.
Computer aided formulation of pharmaceutical dosage forms
Proc. 3rd World Meeting APV/APGI, Berlin, 3/6 April (2000), p. 143-144
Schmitt, S.; Bultmann, J. M.
Compression Properties of Mannitol and Lactose before and after Lyophilisation
DPhG Graduate Student Meeting, Frankfurt (2001)
Bultmann, J. M.
Multicompaction Behaviour of Microcrystalline Cellulose in a Gerteis 3W-Polygran Roller Compactor
Proc. 20th Pharmaceutical Technology Conference, Liverpool (2001), p. 163-167
Bultmann, J. M.v
The Influence of Magnesium Stearate Addition on the Roller Compaction Process and Product Properties
Proc. 20th Pharmaceutical Technology Conference, Liverpool (2001), p. 153-162
Bultmann, J. M.
Roller Compaction: Effect of sieve size and rotor-sieve-distance on granule size
Archiv der Pharmazie, 334 (2001), p. 22
Lintz, F.-C.; Bultmann, J. M.
Comparison of databases and expert-systems for nebulizer formulation development
Proc. AAPS Annual Meeting and Exposition Toronto, Ontario, Canada (2002)
Bultmann, J. M.; Schmitt, S.; Lintz, F. C.
Use of the self learning expert system "AXS" in roller compaction troubleshooting
Proc 4th World Meeting APV/APGI, Florenz (2002), p. 81f
Lintz, F.-C.; Bultmann, J. M.
Use of the self learning expert system "AXS" for the optimization of nebuliser formulations
Proc 4th World Meeting APV/APGI, Florenz (2002), p. 1045f
Bultmann, J. M.
Influence of Sieve Size and Rotor-Sieve Distance in the Roller Compaction Process on granule Size Distribution
Proc 4th World Meeting APV/APGI, Florenz (2002), p. 175f
Shlieout, G.; Lammens, R.F.; Kleinebudde, P.; Bultmann, M.
Dry Granulation with a Gerteis 3-W-Polygran Roll Compactor. Evaluation of different Operation Modes
Proc 4th World Meeting APV/APGI, Florenz (2002), p. 51f
Bultmann, J. M.
Influence of Magnesium-Stearate addition during the roller compaction process: Effect on Process and Granule Properties
Proc 4th World Meeting APV/APGI, Florenz (2002), p. 157f
Bultmann, J. M.
Role of the tamping auger in roll compaction
Proc. DPhG Jahrestagung, D-Würzburg (2003), p. 54
Brudy, J. A.; Bultmann, J. M.
Roll compaction: Development and comparison of methods determining porosity of knurled ribbons
Proc. DPhG Jahrestagung, D-Würzburg (2003), p. 87
Schmitt, S.; Bultmann, J. M.
Tablet properties of native and lyophilized powders as well as binary mixtures
Proc. DPhG Jahrestagung, D-Würzburg (2003), p. 98
Brudy, J. A.; Bultmann, J. M.
Roller compaction: Determining porosity of knurled Ribbons
Proc. AAPS Annual Meeting, Salt Lake City, Utah (2003)
Bultmann, J. M., Brudy, J. A., Farrenkopf, J.
Investigation Of The Tamping Unit In Roll Compaction
Proc. Int. Meeting on Pharm., Biopharm., Nuremberg 15-18.Mar (2004), p. 9
Bultmann, J. M.; Brudy, J. A.
Roll Press Instrumentation of a Gerteis MiniPactor
Proc. DPhG Annual Meeting, D-Regensburg 7.-9. October (2004), p. 153
Brudy, J.A.; Bultmann, J. M.
Comparison of Powder Pycnometry and Punch Method to determine Knurled Ribbon Density
Proc. DPhG Annual Meeting, D-Regensburg 7.-9. October (2004), p. 152
Farrenkopf, J.; Bultmann, J. M.
Roll Compaction: The Effect of Fine and Coarse Particle Fractions on Granule and Tablet Properties
Proc. DPhG Annual Meeting, D-Regensburg 7.-9. October (2004), p. 154
Bultmann, J. M.; Brudy, J. A.; Farrenkopf, J.
Reasons for Sinoidal Wave Patterns and Possible Countermeasures in a Gerteis Minipactor
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4156
Bultmann, J. M.; Brudy, J. A.
Is the Tamping Auger a tamping one under all Circumstances?
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4157
Brudy, J. A.; Bultmann, J. M.
Roll Compaction: Influence of Process Parameters on Ribbon Density and Tensile Strength
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4158
Brudy, J. A.; Bultmann, J. M.
Influence of Roll Compaction Force on Tablet Tensile Strength and Solid Fraction
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4159
Bultmann, J. M.; Brudy, J. A.; Farrenkopf, J.
Instrumentation of a Gerteis Minipactor's Roll
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4160
Bultmann, J. M.; Brudy, J.A.; Farrenkopf, J.
Investigation of the tamping unit in roll compaction
Proc. Int. Meeting on Pharmaceutica, Biopharmaceutics and Pharmaceutical Technology, D-Nürnberg, 15-18. March (2004), p9
Bultmann, J. M.; Brudy, J.A.
Roll Press Instrumentation of a Gerteis MiniPactor
Proc. DPhG Annual Meeting, D-Regensburg 7.-9. October (2004), p153
Brudy, J.A.; Bultmann, J. M.
Comparison of Powder Pycnometry and Punch Method to determine Knurled Ribbon Density
Proc. DPhG Annual Meeting, D-Regensburg 7.-9. October (2004), p152
Farrenkopf, J.; Bultmann, J. M.
Roll Compaction: The Effect of Fine and Coarse Particle Fractions on Granule and Tablet Properties
Proc. DPhG Annual Meeting, D-Regensburg 7.-9. October (2004), p154
Bultmann, J. M.; Brudy, J. A.; Farrenkopf, J.
Reasons for Sinoidal Wave Patterns and Possible Countermeasures in a Gerteis Minipactor
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4156
Bultmann, J. M.; Brudy, J. A.
Is the Tamping Auger a tamping one under all Circumstances?
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4157
Brudy, J. A.; Bultmann, J. M.
Roll Compaction: Influence of Process Parameters on Ribbon Density and Tensile Strength
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4158
Brudy, J.; Bultmann, J. M.
Influence of roll compaction force on tablet tensile strength and solid fraction
Proceedings of the AAPS Annual Meeting Baltimore, MD (2004), p. W4159.
Bultmann, J. M.; Brudy, J. A.; Farrenkopf, J.
Instrumentation of a Gerteis Minipactor's Roll
Proc. AAPS Annual Meeting, Baltimore, MD (2004), p. W4160
Bultmann, J. M.; Farrenkopf, J.
Experts in the Palm of your Hand
Proc. AAPS Annual Meeting and Exposition Nashville, Tennessee (2005)
Bultmann, J. M., Brudy, J. A., Farrenkopf, J., Schimpf, U.
Thermal Imaging in Roll Compaction
Proc. AAPS Annual Meeting and Exposition Nashville, Tennessee (2005)
Brudy, J. A., Bultmann, J. M., Farrenkopf, J.
Influence Of Roll Compaction Force On Pore Stucture And Surface Structure Of MCC Ribbons And Tablets
Proc. AAPS Annual Meeting and Exposition Nashville, Tennessee (2005)
Raposo, A.; Bultmann, J. M.; Keller, M.; Akkar, A.
Cyclodextrin Nanoparticles Loaded with Cyclosporine A for Inhalation
Proc. AAPS Annual Meeting and Exposition Nashville, Tennessee (2005)
Brudy, J.; Miguelez, A.; Vogel, C.; Bultmann, M.; Reich, G.
NIR Spectroscopic Determination of Ribbon Porosity in Roller Compaction
Proc. AAPS Annual Meeting and Exposition San Diego, California (2007)
Pfaff, C.; Farrenkopf, J.; Schuessler, E.; Granzow, D.; Bultmann, J. M.
Roller Compaction of Potent Compounds
Proc. 6th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, Barcelona, 7-10 April (2008)
Bultmann, J. M.
Considerations and challenges in clinical supplies manufacture compared to commercial production
ISPE Aseptic Conference, 4./5. March 2013, Baltimore
Bultmann, J. M.
Launch from a pilot plant - A viable option in a changing environment?
ISPE Aseptic Conference, 23./24. Feb. 2015, Baltimore
Bultmann, J. M.
Building a machine for the future
ISPE Aseptic Conference, 7./8. Mar 2017, Reston
Building a Flexible Robotic Small Scale Filling Line
PDA: The Universe of Pre-filled Syringes and Injection Devices, 7./8. Nov. 2017, Vienna
Bultmann, J. M.
Case Study AbbVie: Small batch filling with robotics
2018 PHARMA CONGRESS Production & Technology: Current Aseptic Technologies, 24./25. Apr. 2018, Düsseldorf
Bultmann, J. M.
What can be so difficult about filling liquids into glasses? Developing NBE fill finish processes
Controlled Release Society German chapter annual meeting, 29.Feb./1. Mar. 2024, Bad Dürkheim
Bultmann, J. M.
Sustainability in Big Pharma – Can supercomputing do the magic?
Sustainable Industrial Processing Summit (SIPS 2024) - Leuenberger Symposium, Iraklio, Greece, 20.-24. Oct. 2024
Roblegg, E.; Bultmann, J. M.
From “Publish or Perish” to “Publish AND Perish” – young scientists being struck between science and funding
Sustainable Industrial Processing Summit (SIPS 2025) - Tanner Symposium, Cebu, Philippines, 27.-20. Nov. 2025
Witting, M.; Li, Y.; Schuhmacher, M.; Romero, C.; Bultmann, J. M.
Sustainable CFG modelling - A contradictionin times of energy guzzling data centers? OR: Models on top of models
Sustainable Industrial Processing Summit (SIPS 2025) - Tanner Symposium, Cebu, Philippines, 27.-20. Nov. 2025
Roblegg, E;. Sonntag, C. D.; Bultmann, J. M.
The altruistic component of sustainability: Funding of young scientists - a success story
Sustainable Industrial Processing Summit (SIPS 2025) - Tanner Symposium, Cebu, Philippines, 27.-20. Nov. 2025